Step2 Position the antenna so its notches are facing the Cisco label on the front of the base. Click OK to close each open window. •Windows XP a. See the enlarged view in Figure 3. Follow these steps to install these client adapter software components on a computer running Windows 2000 or XP. Source
Complete the information below, and keep it for reference. Before removing the card from the anti-static packaging, discharge static by touching a metal part of a grounded PC. Step5 Locate an empty PCI expansion slot inside your computer. Actual delivery times can vary, depending on the customer location. http://www.cisco.com/c/en/us/support/wireless/aironet-802-11a-b-g-cardbus-wireless-lan-client-adapter-cb21ag/model.html
Step3 Click OK. Caution Do not force the card into your computer's Cardbus slot. See Figure3-4. If your computer is running Windows XP, the window titled IMPORTANT: Please Read!
Figure4 Inserting the Antenna into Its Base 1 Antenna 2 Notch 3 Antenna base Mounting the Antenna Because the PCI card is a radio device, it is susceptible to RF obstructions Caution Do not pull on the antenna cable or detach it from the PCI card. i See More n wXP, you will have to open the net manager and select the netork you want, that was the only "D'OH!" moment for me, this driver RAWKZ, major Figure3-8 Preparing Setup Window Figure3-9 Cisco Aironet Installation Program Window Step19 Click Next.
If you want to mount the antenna to a wall, go to Step 2. Installing the Client Adapter Software on Devices Running Windows 2000 or XP Follow these steps to use the Install Wizard to install the client adapter driver and utilities on a device Step9 When the Choose Destination Location window appears, perform one of the following: •If you chose the first option in Step 5, click Next to install the client utility files in http://www.cisco.com/c/en/us/products/wireless/aironet-802-11a-b-g-cardbus-wireless-lan-client-adapter-cb21ag/ Save the file to your device.
Step33 When a message appears indicating that your computer needs to be rebooted, click OK and allow your computer to restart. Note The profiles for PC-Cardbus cards are tied to the slot in which the card is inserted. Additional Requirements In addition to the items shipped with the client adapter, you also need the following items in order to install and use the adapter: •For the CB21AG or PI21AG If it does not, use the Install Wizard file on your CD.
Step4 Click Finish. Continued If you proceed without the client adapter inserted, the installation continues, but the driver installation is incomplete. Cisco Aironet 802.11a/b/g Wireless Adapter Driver Download A Setup Status Window appears. Air-pi21ag-a-k9 Windows 7 Driver Data Sheets and Literature Data Sheets (All Cisco Aironet Wireless LAN Client Adapters Data Sheets) Cisco Aironet 802.11a/b/g Wireless CardBus Adapter End-of-Life and End-of-Sale Notices (All Cisco Aironet Wireless LAN Client
Step3 Tap the two supplied wall anchors into the holes. http://socialmedialab.net/windows-7/cisco-802-11b-wirelessmpci-driver.html See Chapter4 for information on creating profiles for your client adapter. b. Allow the installation program to run. 802.11 G Wlan Driver Windows 7
Follow the instructions in this section to position the PCI card's antenna on a flat horizontal surface or to mount it to a wall. Step6 Slip your card's antenna through the opening near the empty expansion slot so that it is located outside of the computer. Installing the Client Adapter Software on Devices Running Windows 2000 or XP, page 23, or Installing the Client Adapter Software on Devices Running Windows Vista, page 29 Inserting a Client Adapter have a peek here Then, follow the instructions to create a CCO username and password.
In this situation, the installer might not detect this condition, and the rest of the software will not function correctly. These products can cause signal interference because they operate in the same frequency range as the PCI card. Note If you choose one of the first two options and a client adapter is not inserted into your computer, the following message appears: "The device may not be present or
Figure5 Bottom of Antenna Base Step5 Position the mounting holes on the bottom of the antenna base over the screws (see Figure 6) and pull down to lock in place. This window states that the installation program installs the driver automatically when the client adapter is inserted. In the Components Checked Are Used by This Connection field, click Internet Protocol (TCP/IP) and Properties. For the CB21AG and PI21AG on a device that is running Windows 2000 or XP, the two primary client utilities are Aironet Desktop Utility (ADU) and Aironet System Tray Utility (ASTU).
The Choose Configuration Tool window appears (see Figure3-15). The Setup Status window appears (see Figure3-17). Figure3-12 Choose Destination Location Window Step23 Perform one of the following: •If you chose the first option in Step20, click Next to install the client utility files in the C:\Program Files\Cisco http://socialmedialab.net/windows-7/cisco-aironet-wireless-card-drivers.html Step3 Hold the low-profile bracket to the card so that the LEDs slip through their corresponding holes on the bracket.
The following topics are covered in this chapter: •Inserting a Client Adapter •Installing the Client Adapter Software •Installing the Intermediate Driver Manually •Installing a Microsoft Hot Fix for Group Policy Delay Click Yes torestart your computer after the installation. (The installation program will install the required drivers.) Referenced from: Cisco Article ID: 5299 Last Updated: 1/11/2017 12:26:25 PM Attachments: WinClient-802.11a-b-g-Ins-Wizard-v36.exe Need d. If you chose Third-Party Tool, the Enable Tray Icon window appears (see Figure3-16).
Step8 Reinstall the screw on the CPU back panel and replace the computer cover. Duration of Hardware Warranty One (1) Year Replacement, Repair, or Refund Policy for Hardware Cisco or its service center will use commercially reasonable efforts to ship a replacement part within ten When used with approved Cisco Aironet antennas, Cisco Aironet products meet the uncontrolled environmental limits found in OET-65 and ANSI C95.1, 1991. e.
These instructions apply to Windows XP ONLY. (The hardware download size is 12.5 MB.) Download & Install Cisco Aironet AIR-CB21AG Wireless Adapter Drivers 1.Insert the wireless adapter into your computer. The Cisco Aironet Installation Program window appears. Step1 Click New on the Cisco Aironet Desktop Utility (Profile Management) window. Note If you want to specify a different program folder, choose a folder from the Existing Folders list or type a new folder name in the Program Folder field and click
Home Skip to content Skip to footer Worldwide [change] Log In Account Register My Cisco Cisco.com Worldwide Home Products & Services (menu) Support (menu) How to Buy (menu) Training & Events See Figure3-3. Step5 Go to the "Installing the Client Adapter Software" section. Step9 Click Windows 2000, Windows XP, or Windows Vista.
Click Cancel when the Found New Hardware Wizardpops up. 3. Caution Do not force the card into the expansion slot as this could damage both the card and the slot. Step21 If you are prompted to restart your computer, click Yes. e.
Note If you want to install the client utilities in a different directory, click Browse, choose a different directory, click OK, and click Next. •If you chose the Make Driver Installation Step7 Reboot system. Find the CB21AGg instance. Note To use ASTU instead of ADU to select the active profile, right-click the ASTU icon, select the Select Profile option, and select a profile.