The firmware can be obtained from cisco.com however you will need to register first before you can actually obtain the proprietary firmware. If you are working with the driver downloaded from the Cisco Downloads, go to the directory to which you saved the file. All of the devices used in this document started with a cleared (default) configuration. Furthermore, the firmware upgrade/downgrade can only be done under windows. Source
Q. Note:On most Pentium PCs, PCI expansion slots are white. Note:If you are unsure about the device name and number, you can verify your device's information by running ACU and using the Commands menu to select Status. I'm running Ubuntu 8.10 (OpenGEU) kernal 2.6.27-17, if it matters. http://www.cisco.com/c/en/us/support/docs/wireless/aironet-340-wireless-pc-card-adapter/8127-linux.html
Boo #2 The workaround was simple though. It is recommended to use PCMCIA-CS version 3.1.22 or later for the 340 series clients, and 3.1.26 or later for the 350 series clients.For more information on installing a client adapter Supports Aironet 4500, 4800 and Cisco 340/350 among others. See attached files produced after reverting to original .ko files.
For me, although every other network machine in this house was able to be pinged by this machine, this did not include the internet router - unfortunately leading to no internet Have a sneaky feeling this is going to be simple but can't find it. « Last Edit: March 08, 2013, 01:13:40 AM by Trio3b » Logged Trio3b Guest Re: Cisco Aironet For instructions on how to use each utility, refer to the Cisco Aironet Wireless LAN Adapters Software Configuration Guide or readme.txt file that accompanied the drivers in the tarball. Client to Access Point Client to Bridge (in Access Point mode) Client to Base Station Client to Client (in AdHoc mode) Q.
Users of other distributions should follow their distribution's recommendations on configuring DHCP. The Cisco Aironet card requires 16-bit access, and if the modules for the socket are compiled for 32-bit mode only, you must recompile them into 16-bit capable versions. Does the card work with Windows XP? https://supportforums.cisco.com/document/23651/how-install-linux-drivers-client-adapter If your network is live, make sure that you understand the potential impact of any command.
Most Linux distributions should have one or both of them. Q. Trio3b Guest Re: Cisco Aironet 350 0n Thinkpad « Reply #2 on: March 07, 2013, 08:00:28 PM » Yes, cards working under WinXP although as mentioned I have not checked WPA Software updates are available at the Cisco Downloads - Wireless Software Page.
After modprobe'ing, airo and airo_cs do show up in lsusbifconfig shows only eth0 and loiwconfig show lo, irda0, eth0 all with NO wireless extensionsPCC networking initiates "use a windows driver ( https://ubuntuforums.org/showthread.php?t=1514304 Reason: updated Adv Reply March 11th, 2011 #8 jacksonpollack View Profile View Forum Posts Private Message Just Give Me the Beans! No compilation is needed. A.
Thanks for posting this guide! this contact form vBulletin ©2000 - 2017, Jelsoft Enterprises Ltd. The values montecito and tsunami are shown here for demonstration purposes only. Re: Cisco Aironet 350 0n Thinkpad « Reply #6 on: March 08, 2013, 07:49:02 AM » Quote from: Trio3b on March 08, 2013, 01:55:17 AM...3 No no conection either with Winxp
Interested? What distributions and kernels does the Linux client run on? If not, then check that the interface eth1 is not mentioned in /etc/network/interfaces and that the last line in /etc/Network Manager/nm-settings.conf looks like [ifupdown] managed=true You should not need to do have a peek here I have read conflicting info on whether or not this is a WPA capable device. 1.
It is not a problem with the card; it is the socket. Proceed to Set Utility Permissions. When I try to launch the Aironet Client Utility (ACU) from a terminal window, I get the No Radio Found error message.
Caution:Do not force the adapter into the expansion slot. Refer to Cisco Technical Tips Conventions for more information on document conventions. Does the Linux driver for the Cisco Aironet 350 Series Wireless Card support Wi-Fi Protected Access (WPA) encryption? In a terminal window, type sh ./cwinstall and press Enter.
Where can I find help to install my Client Card? Reinstall the screw on the back panel of the CPU and replace the computer cover. If the adapter does not insert easily, remove the adapter and reinsert it. Check This Out Complete these steps to configure the IP address with the linuxconf utility: At a command prompt, type linuxconf and press ENTER.
The download (see if this link works) can be run on your windows partition while the card is plugged in. Q. Install PCI Drivers If you use a PCI card rather than a PCMCIA card, some different steps apply.