Assembling the Antenna Follow the steps below to assemble the PCI card's antenna. Figure3-16 Rotating the Antenna Step7 Boot up your PC. Inserting a PC-Cardbus Card Step1 Before you begin, examine the card. Product Specifications Table 2 lists product specifications for the Cisco Aironet 802.11a/b/g Wireless CardBus Adapter. http://socialmedialab.net/cisco-aironet/cisco-aironet-802-11abg-wireless-adapter-driver.html
Software Components The client adapters have two major software components: a driver and client utilities. The active profile is designated by a radio icon in the profiles list. The Setup Type window appears. Step3 Hold the card with the Cisco logo facing up and insert it into the Cardbus slot, making sure that the card is fully seated (see Figure 1). http://www.cisco.com/c/en/us/support/wireless/aironet-802-11a-b-g-cardbus-wireless-lan-client-adapter-cb21ag/model.html
Step9 Click Windows 2000, Windows XP, or Windows Vista. These instructions apply to Windows XP ONLY. (The hardware download size is 12.5 MB.) Download & Install Cisco Aironet AIR-CB21AG Wireless Adapter Drivers 1.Insert the wireless adapter into your computer. For optimal reception, position the antenna so that it is pointing straight up (see Figure 7).
Warning This device has been tested and complies with FCC RF Exposure (SAR) limits in typical laptop computer configurations and this device can be used in desktop or laptop computers with Open a Help Desk Ticket! Step14 If you chose Cisco Aironet Desktop Utility (ADU) in Step 13, go to Step 16. See Chapter4, for information on creating profiles for your client adapter.
The Setup Type window appears (see Figure3-3). Air-cb21ag-a-k9 Driver Figure3-7 Rotating the Antenna Step7 Boot up your PC. The adapter supports WPA2, the Wi-Fi Alliance certification for interoperable, standards-based wireless LAN security. Read the document online, or click the PDF icon to download and print the document in Adobe Portable Document Format (PDF).
Together, these utilities provide an intuitive graphical userinterface (GUI) for easy configuration, monitoring, and management of the Cisco Aironet 802.11a/b/g Wireless CardBus Adapter. Window Step20 Read the information displayed and click Next. Product Specifications Feature Description Form Factor CardBus Type II Interface • 32-bit CardBus with standard 68-pin connector • PC-Card Rev. 7.0-compliant Data Rates Supported 1, 2, 5.5, 6, 9, 11, 12, Note If you do not click Cancel, the wizard will attempt to install software for the client adapter but will be unable to find it.
Step31 Now that your client adapter is properly installed, it is ready to be configured. •If you are planning to configure your client adapter through ADU, go to Chapter4, to create c. Cisco Aironet 802.11a/b/g Wireless Adapter Driver Download Proper operation of this radio device according to the instructions in this document and the installation and configuration guide will result in user exposure substantially below the FCC recommended limits. •Do Air-cb21ag-a-k9 Driver Windows 7 Both links lead to the same software release.
Right-click Local Area Connection x (where x represents the number of the connection). this contact form The Cisco Aironet 802.11a/b/g Wireless CardBus Adapter supports the most common 802.1X authentication types, including EAP-Flexible Authentication via Secure Tunneling (EAP-FAST), Cisco LEAP, EAP-Transport Layer Security (EAP-TLS), Protected Extensible Authentication Protocol-Generic Once installed, ASTU is accessible from an icon in the Windows system tray. Figure7 Rotating the Antenna Step7 Boot up your PC.
Step9 Save the file to your computer's hard drive. Note Refer to Appendix F of the Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and PI21AG) Installation and Configuration Guide for instructions on using the utility. Click OK to save your changes and close the Internet Protocol (TCP/IP) Properties window. have a peek here Click the Information Packet Number field, and make sure that the part number 78-5235-03B0 is highlighted.
Figure3-12 Choose Destination Location Window Step23 Perform one of the following: •If you chose the first option in Step20, click Next to install the client utility files in the C:\Program Files\Cisco Table3-1 compares Windows XP and ADU client adapter features. If you choose this option, go to Step 16. •Make Driver Installation Diskette(s)—Enables you to create driver installation diskettes.
Inserting a Client Adapter, page 8 2. b. Step5 Choose the "Have disk" button. Step26 When a message appears indicating that your computer needs to be rebooted, click OK and allow your computer to restart.
See Figure3-2. Therefore, you must always insert your PC-Cardbus card into the same slot or create profiles for both slots. Step29 If your network setup does not include a DHCP server and you plan to use TCP/IP, follow these steps for your operating system. •Windows 2000 a. http://socialmedialab.net/cisco-aironet/cisco-aironet-802-11a-b-g-wireless-cardbus-adapter-drivers.html Step4 Browse to the following location: http://www.cisco.com/public/sw-center/ Step5 Click Wireless Software.
Choose Use the following IP address and enter the IP address, subnet mask, and default gateway address of your computer (which can be obtained from your system administrator). Caution Do not force the card into your computer's Cardbus slot. Step1 Turn off the PC and all its components. Step3 Press the antenna cable into the receptacle on the top of the base as shown in Figure 4.
View the End-of-Life Notice to learn: End-of-sale and end-of-life dates What replacement products are available Information about product support This IEEE 802.11a/b/g compliant CardBus client adapter is ideal for laptops and Choose Use the following IP address and enter the IP address, subnet mask, and default gateway address of your computer (which can be obtained from your system administrator). Click OK twice. •Windows XP—Double-click My Computer, click Control Panel, click Network and Internet Connections, and click Network Connections. Before removing the card from the anti-static packaging, discharge static by touching a metal part of a grounded PC.
For Windows 2000 and XP, the file name is WinClient-802.11a-b-g-Ins-Wizard-vxx.exe, where xx is the version number. Enhanced client network management features include: • Profile manager: Allows users to create specific profile settings for various environments, making it simple for telecommuters and business travelers to move from one Double-click My Computer, Control Panel, and Network and Dial-up Connections. Caution Cisco Aironet CB21AG and PI21AG client adapter software is incompatible with other Cisco Aironet client adapter software.
Caution Static electricity can damage your PCI card. Step4 Press the antenna straight down into the receptacle until it clicks into place. When you view the details of available network connections, the client adapter is identified in the Device Name column. Launch your browser, and go to this URL: http://www.cisco.com/univercd/cc/td/doc/es_inpck/cetrans.htm The Warranties and License Agreements page appears. 2.
If you have multiple client adapters on your device, choose Network and Sharing Center > Manage network connections.