The card is keyed so it can be inserted only one way into the Cardbus slot, which is on the left or right side of the computer depending on the model. window appears (see Figure3-6). Then go to Step7. •If you want to mount the antenna to a wall, go to Step2. To read translated and localized warranty information about your product, follow these steps: a. Source
Caution Do not pull on the antenna cable or detach it from the PCI card. The utility operates at the RF level and is used to determine the best placement and coverage (overlap) for the network's infrastructure devices. Step2 Turn on your computer and let the operating system boot up completely. b.
If you proceed without the client adapter inserted, the installation continues, but the driver installation is incomplete. The Setup Type window appears. Step3 Use your computer's web browser to access the following URL:http://www.cisco.com/public/sw-center/ Step4 Click Wireless Software.
The antenna is meant to be permanently attached to the card. Step2 Select a profile for the client adapter to use by clicking that profile in the profiles list. Obtaining the Latest Software for Client Adapters on Devices Running Windows 2000, XP, or Vista, page 21 3. 802.11 G Wlan Driver Windows 7 Step2 Position the antenna so its notches are facing the Cisco label on the front of the base.
Step5 Under Aironet Client Adapter Installation Wizard (For Windows), click 802.11a/b/g (CB21AG, PI21AG). Air-cb21ag-a-k9 Driver Step1 Open ADU and click the Profile Management tab. One end has a dual-row, 68-pin connector. http://www.cisco.com/c/en/us/products/collateral/wireless/aironet-802-11a-b-g-cardbus-wireless-lan-client-adapter-cb21ag/product_data_sheet09186a00801ebc29.html Product Specifications Feature Description Form Factor CardBus Type II Interface • 32-bit CardBus with standard 68-pin connector • PC-Card Rev. 7.0-compliant Data Rates Supported 1, 2, 5.5, 6, 9, 11, 12,
If you chose Third-Party Tool, the Enable Tray Icon window appears. Figure3-16 Enable Tray Icon Window Step31 Check the Enable Cisco Aironet System Tray Utility (ASTU) check box if you want to be able to use ASTU even though you have chosen The following topics are covered in this chapter: •Inserting a Client Adapter •Installing the Client Adapter Software •Installing the Intermediate Driver Manually •Installing a Microsoft Hot Fix for Group Policy Delay The Successfully added
Home Skip to content Skip to footer Worldwide [change] Log In Account Register My Cisco Cisco.com Worldwide Home Products & Services (menu) Support (menu) How to Buy (menu) Training & Events Get More Information Step4 Drive the two supplied screws into the wall anchors, leaving a small gap between the screw head and the anchor. Cisco Aironet 802.11a/b/g Wireless Adapter Driver Download Complete the information below, and keep it for reference. Air-cb21ag-a-k9 Driver Windows 7 The Website is available 24 hours a day at: http://www.cisco.com/en/US/support/index.html Access to all tools on the Cisco Support Website requires a Cisco.com user ID and password.
Figure3-6 IMPORTANT: Please Read! this contact form These components are installed together by running a single executable Install Wizard file that is available from the CD that shipped with your client adapter or from Cisco.com. Step20 If your network setup does not include a DHCP server and you plan to use TCP/IP, follow one of these steps for your operating system. •Windows 2000—Double-click My Computer, Control Note Refer to Appendix E of the Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and PI21AG) Installation and Configuration Guide if you are planning to configure your client adapter through Air-pi21ag-a-k9 Driver Download
For the CB21AG and PI21AG on a device that is running Windows Vista, you also can adjust settings and display information using the Windows Vista diagnostic application. Click the Information Packet Number field, and make sure that the part number 78-5235-03B0 is highlighted. To do so, click Option #1: Aironet Wireless Software Selector, follow the instructions on the screen, and go to Step7. http://socialmedialab.net/cisco-aironet/cisco-aironet-802-11abg-wireless-adapter-driver.html Read the document online, or click the PDF icon to download and print the document in Adobe Portable Document Format (PDF).
Yes No Feedback Share Information For Small Business Midsize Business Service Provider Industries Automotive Consumer Packaged Goods Education Energy Financial Services Government Healthcare Hospitality Industrial Life Sciences Manufacturing Materials and Mining Step3 Click the hot fix file (userenv.zip). Step32 When prompted to insert your client adapter, click OK.
These innovative services programs are delivered through a unique combination of people, processes, tools, and partners, resulting in high levels of customer satisfaction. Click Properties. Figure3-15 Mounting the Antenna Step6 The antenna rotates 90 degrees from its base. appears.
CSCsg65164-Authentication timeout for EAP-FAST occurs after 60 seconds The ADU sends an EAPOL-start message after 30 seconds. Go to Step25. Step2 Drill two holes in the wall that are 1.09 in. (2.8 cm) apart. Check This Out Figure5 Bottom of Antenna Base Step5 Position the mounting holes on the bottom of the antenna base over the screws (see Figure 6) and pull down to lock in place.
For additional information about the client adapter on a device that is running Windows2000 or XP, see the Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and PI21AG) Installation and Configuration Note If you want to install the client utilities in a different directory, click Browse, choose a different directory, click OK, and click Next. •If you chose the Make Driver Installation Step19 If the Windows Found New Hardware Wizard appears after your computer reboots, click Next, allow the wizard to install the software for the client adapter, and click Finish. e.
Step29 Click Next. Forcing it will damage both the card and the slot. Declaration of Compliance The Declaration of Compliance for this product relevant to the European Union and other countries following EU Directive 1999/5/EC (R&TTE Directive) can be found in the Cisco Aironet