Read the document online, or click the PDF icon to download and print the document in Adobe Portable Document Format (PDF). Insert the card in a different slot and reinstall the drivers. Declaration of Compliance The Declaration of Compliance for this product relevant to the European Union and other countries following EU Directive 1999/5/EC (R&TTE Directive) can be found in the Cisco Aironet Step6 Click Next. Source
For the CB21AG and PI21AG on a device that is running Windows 2000 or XP, the two primary client utilities are Aironet Desktop Utility (ADU) and Aironet System Tray Utility (ASTU). Why does Windows 2000 produce this error message: "The form specified is not one known and recognized"? Cisco engineers do not support these operating systems, except as the systems relate to the client adapter card drivers and the Aironet Client Utility (ACU). Step5 Slip your card's antenna through the opening near the empty expansion slot so that it is located outside of the computer. http://www.cisco.com/c/en/us/support/wireless/aironet-350-wireless-lan-client-adapter/model.html
Follow these guidelines to ensure the best performance: • Place the antenna in an area where large steel structures such as shelving units, bookcases, and filing cabinets will not obstruct radio c. Drivers—PCI and PC Card Q.
The "Starting InstallShield Wizard" message appears followed by the Preparing Setup window (see Figure3-1) and the Cisco Aironet Installation Program window (see Figure3-2). Step11 If your computer is running Windows 2000, go to Step 16. Use the ACU command menu selection for radio off. Air-pci350 Series Driver Download The Choose Configuration Tool window appears (see Figure3-7).
In Case of Difficulty If you experience difficulty getting your client adapter installed and running, look for a solution to your problem in the following places: •ADU's troubleshooting utility. Cisco Aironet 350 Driver Windows 7 Click Documentation and then click Wireless under Product and Support Documentation. Choose Use the following IP address and enter the IP address, subnet mask, and default gateway address of your computer (which can be obtained from your system administrator). Forcing it will damage both the card and the slot.
The hardware does not accept compressed files. Air Pci350 Driver Windows 7 Q. The card is keyed so it can be inserted only one way into the Cardbus slot, which is on the left or right side of the computer depending on the model. View Documents by Topic Choose a Topic Cisco Aironet 350 Mini-PCI Wireless LAN Client Adapter Cisco Aironet 350 Wireless LAN Client Adapter Cisco Aironet 340 Wireless PC Card Adapter Cisco Aironet
Step15 If a message appears indicating that you are required to restart your computer at the end of the installation process, click Yes. The Cisco warranty page appears. Cisco Aironet 350 Series Wireless Lan Adapter Driver Windows 7 A Setup Status Window appears. Cisco Aironet 350 Wireless Lan Adapter Driver If disablement of the radio port fails, use the latest version of the ACU.
Figure3-4 Choose Destination Location Window Step16 Perform one of the following: •If you chose the first option in Step13, click Next to install the client utility files in the C:\Program Files\Cisco http://socialmedialab.net/adapter-driver/cisco-wireless-lan-adapter-driver.html Q. Caution Do not force the card into your computer's Cardbus slot. Step2 Remove the computer cover. Cisco Aironet 350 Series Wireless Lan Adapter Driver Download
Note Refer to Chapters 4 and 5 of the Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and PI21AG) Installation and Configuration Guide if you need additional information on creating and Double-click My Computer, Control Panel, and Network and Dial-up Connections. Go to Step 16. http://socialmedialab.net/adapter-driver/cisco-aironet-wireless-lan-client-adapter-driver.html See Figure 4.
Refer to your PC documentation for slot identification. Cisco Wireless Adapter Driver Ae1200 The Install Site Survey Utility window appears. f.
Note If you want to install the client utilities in a different directory, click Browse, choose a different directory, click OK, and click Next. •If you chose the Make Driver Installation Yes, EAP-FAST is supported in ACU version 6.3. Proper operation of this radio device according to the instructions in this document and the installation and configuration guide will result in user exposure substantially below the FCC recommended limits. •Do Cisco Wireless Adapter Driver Ae2500 Be sure to complete all of these steps: Remove all files, drivers, and anything Aironet-related.
The adapters operate similarly to a standard network product except that the cable is replaced with a radio connection and an access point is required to make the connection to the Q. Each radio card is slightly different because of component tolerances. Check This Out To read the Cisco Information Packet, follow these steps: a.
In the Components Checked Are Used by This Connection field, click Internet Protocol (TCP/IP) and Properties. Therefore, you must always insert your PC-Cardbus card into the same slot or create profiles for both slots. Choose Use the following IP address and enter the IP address, subnet mask, and default gateway address of your computer (which can be obtained from your system administrator). If the card does not insert easily, remove it and reinsert it.
Installing the Client Adapter Software on Devices Running Windows Vista Follow these steps to use to install the client software on a device that is running Windows Vista. Refer to the Cisco Compatible Client Devices matrix for more information on CCX. Caution Do not force the card into your computer's Cardbus slot. See Figure 2.